Philips Saeco HD8753/89 Operating Instructions Manual page 13

3
Press the " " button. Wait until the dispensing procedure is complete
and empty the water tank.
4
Repeat the operations from step 1 to step 3 for 3 times, then continue
with step 5.
5
Place a container under the water dispensing spout.
6
Press the " " button.
The following icon is displayed.
7
Press the " " button to start dispensing hot water. Dispense water
until the no water signal appears.
8
At the end, fi ll the water tank again. Then the products can be brewed
as described in the following sections.
Note: If available, it is necessary to install a new "Intenza +" fi lter in the ma-
chine as described in the following section.
ENGLISH
11