Operations; Playing A Cd; Programming A Cd - GPX PD909B User Manual

█

PLAYING A CD

1. Press the Open Button to open the disc
door.
2. Load a CD into the unit and close the disc
door.
The CD should start playing
automatically.
Press the Play/Pause Button to play the
•
loaded CD if the CD doesn't start playing
automatically.
• Press the Stop Button to stop a CD
during play.
• Press the Prev/Next Buttons on the
remote to skip between tracks on a loaded
CD.
• Press and hold the FWD/REV Buttons
to search an individual track on a loaded
CD.
PD909B.indd 7
█

PROGRAMMING A CD

1. Load a CD into the unit and close the disc
door.
The CD should start playing
automatically.
• Press the Play/Pause Button to play the
loaded CD if the CD doesn't start playing
automatically.
2. Use the Directional Buttons to highlight
the on-screen Edit Mode Button and press
the Enter Button.
3. Use the Directional Buttons to highlight
the desired tracks, and press the Enter
Button.
Repeat step 3 until the desired tracks are
checked.
4. Use the Directional Buttons to highlight
the on-screen Add to Program Button,
and press the Enter Button.
Use the Directional Buttons to highlight
5.
the on-screen Program View Button, and
press the Enter Button.
6. Press the Play Button to begin playing
the programmed tracks.

OPERATIONS

7
4/9/2009 12:11:16 PM