TP-Link Jetstream Series Manual page 6

Figure 1 Connecting to the Ground via Power Supply
Device (Rear Panel)
Note:
The figure is to illustrate the application and principle. The power plug you get from the package and
•
the socket in your situation will comply with the regulation in your country, so they may differ from
the figure above.
If you intend to connect the device to the ground via the PE (Protecting Earth) cable of AC power
•
cord, please make sure the PE (Protecting Earth) cable in the electrical outlet is well grounded in
advance.
Connecting to the Ground via the Grounding Terminal
 Use the grounding bar
If the device is installed in the Equipment Room, where a grounding bar is available, you are
recommended to connect the device to the grounding bar as shown in the following figure.
Figure 2 Connecting to the Grounding Bar
Device (Rear Panel)
Ground Cable
Note:
The grounding bar and the ground cable are not provided with our product. If needed, please self purchase
them.
AC Power Cord (with PE cable)
Grounding Terminal
Grounding Bar
Lightning Protection
4