Advertisement
Note: Do not push the head too hard onto the skin to make sure
the treatment remains comfortable.
4 After 15 seconds, the appliance pauses briefly to let you know that
you have to move it to the area below the left eye (Fig. 13).
5 When the program is finished, clean the Fresh Eyes head with
water and mild soap.
Cleaning
Never use scouring pads, abrasive cleaning agents or aggressive
liquids such as petrol or acetone to clean the appliance.
Cleaning the appliance and head
Make sure the appliance is switched off before you start cleaning it.
Rinse the appliance and the used head thoroughly with water and
mild soap after each use, to ensure optimum performance.
1 Rinse the appliance and head under the tap with warm water and
mild soap (max. 40°C/104°F).
2 Remove the head from the appliance (Fig. 15).
3 Clean the bottom of the head and the connection pin of the
appliance under the tap at least once a week (Fig. 16).
4 Dry the head and the appliance with a towel.
5 Place the attachment on the storage palette and leave it to dry.
You can also leave the attachment on the handle placed on the
charging stand without the protection cap and leave it to dry.
Cleaning the adapter and the charging stand
Danger: Always keep the adapter dry. Never rinse it
under the tap or immerse it in water.
1 Make sure the adapter is unplugged when you clean it. Only wipe
it with a dry cloth.
2 Always detach the charging stand from the adapter before you
clean it (Fig. 17).
3 You can clean the charging stand with a moist cloth. Dry the
charging stand before you reconnect it to the adapter (Fig. 18).
15
English
Advertisement
