GO Industries 45661 Installation Instructions

420 N. Grove, Richardson, TX 75081
Tele: (800) 527 - 4345 Fax: (800) 442 - 5263
Web site: www.goindustries.com
E-mail: sales@goindustries.com
Diagram 1
1. Remove the contents from the box and check for missing pieces or damage. If parts are missing or damaged, contact the original place of purchase.
Read the instructions completely before beginning. Two people are strongly reccommened for this install.
View Behind Bumper (Driver Side)
Bracket
#46662-5
Attaches
here
2. Install the Driver Top Bracket #46662-5 and Passenger Top Bracket #46662-6: Open the hood on the truck. Using Diagram 2, locate the bum-
per bolt on each side of the vehicle. Remove the nut from the bolt. Locate the Driver and Passenger Top Brackets, #46662-5 and #46662-6.
A. Place Driver Top Bracket #46662-5 onto bumper bolt. The end of the Driver Top Bracket #46662-5 (Diagram 3) with the 90 degree bend will go
onto bumper bolt. Replace nut and hand tighten at this time.
B. Repeat step "A" above for the passenger side using Top Bracket #46662-6.
Page 1 of 2 Pages 07/08

Parts List:

1 - Rancher Grille Guard
1 - Driver Top Bracket #46662-5
1 - Passenger Top Bracket #46662-6
1 - Driver Bottom Bracket #46662-7
1 - Passenger Bottom Bracket #46662-8
Bumper
Black Cover
on Bumper
Diagram 2
Rancher Grille Guard

Installation Instructions

45661 & 46661
Dodge Ram 1500 '02 - '05
Dodge Ram 2500/3500 '03 - '05
45663 & 46663
Dodge Ram 2500/3500 '06 - '08
Driver Side Top Bracket #46662-5
Thank you for choosing Go Industries' products. For additional installation
assistance, please call Technical Support (800) 527-4345 or (972) 783-7444
8 - 1/2" x 1 1/4" Hex Head Bolts
8 - 1/2" Hex Nuts
8 - 1/2" Flat Washers
8 - 1/2" Lock Washers
Rancher
Grille Guard
Bracket
#46662-5
Bumper
1/2"
Bolts
Diagram 3