Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Tetrafauna ReptoHeat
Summary of Contents for Tetrafauna ReptoHeat
- Page 1 WELCOME...
-
Page 2: Safety Instructions
Safety Instructions IMPORTANT SAFEGUARDS WARNING: To guard against injury, basic safety precautions should be observed, including the following: READ AND FOLLOW ALL SAFETY INSTRUCTIONS DANGER: To avoid possible electric shock, special care should be taken since water is employed in the use of reptile habitats. - Page 3 3. Close supervision is necessary when any appliance is used by or near children. 4. To avoid injury, do not contact moving parts or hot parts such as heaters, reflectors, lamp bulbs, etc. 5. Always unplug an appliance from an outlet when it is not in use and before cleaning it. Never yank cord to pull plug from outlet.
-
Page 4: Grounding Instructions
Grounding Instructions • This appliance should be grounded to minimize the possibility of electric shock. This appliance is equipped with an electric cord having an equipment grounding conductor and a grounding type plug. The plug must be plugged into an outlet that is installed and grounded in accordance with all appropriate codes and ordinances. •... - Page 5 Clean and Care Guide When performing any maintenance inside, outside or around your reptile habitat always ensure that your basking heater is in the off position and unplugged for at least 15 minutes prior to beginning any maintenance. If the maintenance requires that you detach the basking heater from either the screen top or frame, never place the basking heater on any surface unless it: •...
-
Page 6: Installation
Installation On Screen: 1. First, remove basking heater from package. 2. Unscrew screen mounting thumbscrews from bottom of basking heater. 3. Place basking heater on screen in desired location. Note: We recommend that you place the basking heater in a position over any basking surfaces inside the reptile habitat. It is optimal to place both your basking heater and basking platform to one side of the aquarium. - Page 7 Installation On Reptile Habitat Frame: 1. First, remove basking heater from package. 2. Attach the mounting bracket to the habitat frame. Tighten the safety tension knob to secure the basking heater to the frame. Note: We recommend that you locate the bracket for the basking heater in a position over any basking surfaces inside the habitat.
- Page 8 Basking Recommendations Basking Basking Temperature Provided (°F) Basking Temperatures (°F) Reptiles Temperature 107° Needs (°F) DISTANCE HIGH 102° (Inches) 161.6 129.2 97° 80-85 Aquatic Turtles 92° 123.8 87° 95-105 Bearded Dragon 93.2 82° 93.2 87.8 77° Anoles 88-90 72° 82.4 Leopard Geckos 85-90 82.4...
- Page 9 Department is here to provide assistance to help you solve your problem. United Pet Group, a Division of Spectrum Brands, Inc. 3001 Commerce Street., Blacksburg, VA 24060 • 1.800.526.0650 • www.tetrafauna.com ® Registered Trademark and ™ Trademark of Spectrum Brands, Inc. • © 2015 Spectrum Brands, Inc. • Made in China...
Need help?
Do you have a question about the ReptoHeat and is the answer not in the manual?
Questions and answers