Before First Use; Daily Use - Zanussi ZWY 71054SI User Manual

Table of Contents

Advertisement

The related indicator comes on.
DRAIN & SPIN
With this option you can perform the spin and drain
cycle.
The spin phase is suitable to the washing
programme you set.
If you set also the No Spin
the appliance only drains.
SETTINGS
PERMANENT EXTRA RINSE
With this option you can permanently have an extra
rinse when you set a new programme.
To activate/deactivate this option touch the
buttons
and
indicator
comes on/goes off.
CHILD LOCK
With this option you can prevent that the children
play with the control panel.
To activate/deactivate this option, touch the
buttons
and
indicator
comes on/goes off.
Activate this option after you touch the button
the buttons are locked (except for the button

BEFORE FIRST USE

1. Connect the mains plug to the mains socket.
2. Open the water tap.
3. Put 2 litre of water in the detergent
compartment for washing phase.
This activates the drain system.
4. Put a small quantity of detergent in the
compartment for washing phase.

DAILY USE

WARNING! Refer to Safety chapters.
LOADING THE LAUNDRY
1. Open the appliance lid.
2. Push the button A.
option,
at the same time until the
at the same time until the
DELAY START
With this option you can delay the start of a
programme by 9, 6 or 3 hours.
The indicator of the set value is on.
This option stays active even when you
switch off the appliance.
ACOUSTIC SIGNALS
The acoustic signals operate when:
The programme is completed.
The appliance has a malfunction.
To deactivate/activate the acoustic signals,
touch the buttons
seconds.
If you deactivate the acoustic signals,
they continue operate when the
appliance has a malfunction.
:
) .
5. Set and start a programme for cotton at the
highest temperature without laundry.
This removes all possible dirt from the drum and the
tub.
and
at the same time for 4
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Zwy 71054se

Table of Contents