Philips SCH530/86 User Manual page 6

Cleaning the soother
Nipple, shield and cover can be sterilised* or boiled. Never sterilise nor
boil the measurement unit. Before cleaning always remove the
measurement unit from the nipple and shield as follows (see figure B):
• Turn the measurement unit 90° anticlockwise with respect to the
shield.
• Pull the measurement unit straight out of the nipple and shield. (Be
careful not to bend the tip of the measurement probe.)
After boiling the nipple, shield and cover, drain and push out any
remaining water and allow to dry.
To clean the measurement unit wipe it with a damp cloth.
Reassemble the soother as follows (see figure C):
• Align the blocks of the measurement unit with the matching slots in
the back of the shield.
• Insert the measurement unit into the shield ensuring that the tip of
the probe goes into the pocket inside the nipple.
• Turn the measurement unit 90° clockwise to lock into position.
* Sterilising means destroying harmful bacteria at a temperature of 95°C
for more than 3 minutes. It does NOT mean sterilisation according to
clinical standards. Philips Baby Bottle Steriliser is suitable for sterilising
the nipple, shield and cover.
Baby thermometer set
EN
7