Black Box Freedom Rack Plus Manual page 4

FREEDOM RACK PLUS
The Freedom Rack Plus ships unassembled. Follow the instructions in this section to assemble it.
1. Using (2) 3 ⁄ -16 x 1" screws, (2)
8
side of the first pair of vertical rails. See Figure 1.
2. As shown in Figure 2, using (4)
L-shaped horizontal bar to the bottom front side of the first pair of vertical rails.
3 ⁄ -16 x 1" screws
8
Figure 2. Connecting the L-shaped horizontal bar to the vertical rails.
3. Repeat steps 1 and 2 for the remaining pair of vertical rails.
2
Assembly
3 ⁄ lockwashers, and (2)
8
Horizontal bar
3 ⁄ -16 x 1" screw
8
Vertical rail
Figure 1. Attaching the horizontal bar to the vertical rails.
3 ⁄ -16 x 1" screws, (4)
8
Vertical rail
3 ⁄ -16 x 1" screws
8
3 ⁄ -16 nuts, connect the flat horizontal bar to the front
8
3 ⁄ -16 nut
8
3 ⁄ lockwasher
8
3 ⁄
3 ⁄ -16 x 1" screw
8
Vertical rail
3 ⁄ lockwashers, and (4)
8
⁄ -16 nuts
3
8
Vertical rail
3 ⁄ lockwashers
8
L-shaped horizontal bar
3 ⁄ -16 nut
8
lockwasher
8
3 ⁄ -16 nuts, attach the bottom
8
3 ⁄ -16 nuts
8
3 ⁄ lockwashers
8