AVLT-Power Non-VESA Monitor Adapter Kit for 13" to 27" LCD/LED Screen Sizes Installation Instructions Manual

Advertisement

Quick Links

Non-VESA Monitor Adapter Kit for
13" to 27" LCD/LED Screen Sizes

Installation Instructions

Weight Capacity: 8KG (17.6 lbs)
AP4-0021A
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Non-VESA Monitor Adapter Kit for 13" to 27" LCD/LED Screen Sizes and is the answer not in the manual?

Questions and answers

Summary of Contents for AVLT-Power Non-VESA Monitor Adapter Kit for 13" to 27" LCD/LED Screen Sizes

  • Page 1: Installation Instructions

    Non-VESA Monitor Adapter Kit for 13" to 27" LCD/LED Screen Sizes Installation Instructions Weight Capacity: 8KG (17.6 lbs) AP4-0021A...
  • Page 2: Specifications

    Specifications Screen Size 13" to 27" Rated Load 17.6 lbs (8 Kgs) VESA compatible 75x75 / 100x100mm Screens Thickness 1" to 1.79" Material Steel/Plastic Color Black Product Weight 1.5 lbs Product Dimension 14.78"x14.78"x1.57" Unpacking • Carefully remove the contents and lay them out on cardboard or other protective surface •...
  • Page 3: Installation

    Installation Step 1) Assemble the Support Arm Select Bolt (F/G/H) according to the depth of your monitor and use it to install Support (B) onto Arm (A) using a Phillips screwdriver. Do not fully tighten until instructed to do so, see Figure 1. Figure 1 Step 2) Install the Support Arm to the VESA Plate Note: Select one of the four the installation options that matches your monitor's backplate...
  • Page 4 2B) Y-pattern: Suitable for all backplate surfaces. Use two sets of bolt/washer/nut to attach the upper arms and one set of bolt/washer/nut to attach the lower arms to the VESA plate. 1. Use Bolt (E), Washer (I) with Nut (D) and tighten using Wrench (J), see Figure 3. Note: Do not fully tighten until instructed to do so in Step 3.
  • Page 5: Maintenance

    2D) H-pattern: Suitable for flat backplate surfaces. Use one set of bolt/washer/nut to attach the arms to the VESA plate. 1. Use Bolt (E), Washer (I) with Nut (D) and tighten using Wrench (J), see Figure 5. Note: Do not fully tighten until instructed to do so in Step 3. Figure 5 Step 3) Install the Monitor 1.
  • Page 6 Blank page...
  • Page 7 Blank page...
  • Page 8: Warranty Statement

    Warranty Statement This warranty covers the original purchaser and guarantees the product to be free of any defects in materials or workmanship for one (1) year from the date of purchase of the product. Copyright Statement Non-VESA Monitor Adapter Kit for 13-27" LCD/LED Screen Sizes is a trademark of AVLT-Power Inc.

Table of Contents