Radio Shack TRS-80 PC-2 Owner's Manual page 6

3. Slide the RS-232C Interface onto Metal Support
Bracket A so that the RS-232C 60-Pin connectors are
connected. (See Figure 3.)
Bracket B
'ii!----~ Long Screws
Figure 3. Connecting the PC-2 to the RS-232C
Interface.
4. If you are using the AC Adapter, plug it into the PC-2
RS-232C Power Supply Jack.
Connecting the PC-2 Printer/Plotter/Dual Cassette
Interface to the PC-2 RS-232C Interface
1. At the bottom of the PC-2 Printer/Plotter/Dual Cas-
sette Interface, remove screws A and B. Position Metal
Support Bracket B so that the Interface
cI
ips to the
slot of the bracket. To secure the metal bracket, use
the long screws included with the package. (See Figure
4.)
6
Figure 4. Connecting Metal Support Bracket B to the
PC-2 Printer/Plotter/Dual Cassette Interface.
2. Slide the RS-232C Interface onto Metal Support
Bracket B so that the Interface's male 60-Pin Plug con-
nects with the Printer/Plotter/Dual Interface's female
60-Pin Plug. (See Figure 5.)
RS-232C
connector
Figure 5. RS·232C Interface to Printer/Plotter/Dual
Cassette Interface.
7