Advertisement
Kit Contents
Kit Contents:
(1) Wall Bracket
Wall Mount Instructions
Determine Location: Select appropriate location on wall. Consider cable routing
Step 1
and length
Step 2
Mark Hole Positions: Hold Wall Bracket in position and mark two hole positions
with pencil.
Step 3
Install Drywall Anchor: Install one Drywall Anchor at each hole mark. Using a
#2 Phillips head screwdriver, press the anchor into the drywall while turning
clockwise until it is seated flush with the wall.
Note: Two small general purpose 3M Command Strips may be used in place of
screws for mounting.
Page 2
Wall Mount Hardware Package:
(2) Flat Head Screws
(2) Drywall Anchors
Advertisement
