Table of Contents
Advertisement
WALL MOUNT DVR
1.6
Remote Controller
1. Installing the remote control
Open the battery cover, install two batteries (Type No.7), make sure positive and negative poles are
right, then close the battery cover.
2. Using the remote control
Before using it, please confirm that batteries have been installed correctly. When using it, please aim
IR TX (transmitter) of the remote control at IR reception of the DVR. Then the IR light in the front panel
will on and the icon on the top-right of the monitor screen t urns to blue "
s
controlled by the remote control.
Note: If you don't want to use the remote control, you could set in the system setup menu.
Set the item REMOTE ID as OFF. Then the IR Receiver light in the front panel will be off and the operation
of the remote control is invalid and the red icon" " displays on screen.
3. Trouble shooting
If the DVR can not be controlled by the remote control, please check the following aspects:
i
Check the positive and negative poles of the batteries.
ii
Check the electric quantity of the batteries.
iii Check that whether Remote Sensor are blocked or not.
iiii Whether Fluorescent lamps are being used or not nearby.
Symbol
No.
1
2
Description
Name
Power key Press it to power off the DVR.
IR ID key
Press it to control the DVR which have been set the remote ID.
6
Version 1.10
" The DVR can be
Advertisement
Table of Contents
