Non-Adjustable Non-Assembled Roof Curb Installation Instructions; Spare Parts - Lennox FLEXY II Series Installation, Operating And Maintenance

NON ADJUSTABLE ROOF CURB - Installation instructions
This roof curb will arrive as a packaged on a pallet and need to be built together.
The part will be connected by special corrosion f ree nails. It is not possible to connect with standard nail equipment because
there is a lot of power needed. Theref ore, you need a pneumatic or electric dev ice.
Foam Insulation Installing

Stick large foam pieces underneath the flat top
Foam Gasket Installing

Stick gasket all around the curb flange's top
Let it free on 200 mm
long to enable water
drainage

Spare parts

GASKET 5840071R Grey foam M1
INSULATION 5840071R
Rivets 5820542X 4.8 x 8 mm
IOM – FLEXY II – 1007 – E
Fbox
17 m / 0.85 m²
760 x 1960 - 1.39 m²
100
Gbox
19 m / 0.95 m²
920 x 1960 - 1.79m²
130
Hbox
21 m /1.1 m²
tbd
160
Page 21