Advertisement
3 Before you start curling, comb your hair and divide your hair into
small sections. Press the lever ( ) and place a section of hair
between the barrel ( ) and clip ( ).
4 Close the Clip by releasing the Lever and slide the Barrel to the hair tip.
5 Hold the cool tip( ) and the handle ( ) of the curling iron, and
then wind the section of hair round the barrel from tip to root by
rotating the curler.
6 Hold the curling iron in the position for max. 10 seconds.
Note
•
Do not pull at the curler when you unwind the section, otherwise you would
straighten the curl.
7 Unwind the section of hair until you can open the clip again with
the lever.
8 Release the curled hair.
To curl the rest of your hair, repeat steps 3 to 8.
You may curl your hair both from inside out or from outside in as you like.
After use:
1 Switch off the appliance and unplug it.
2 Place it on the resting stand ( ) until it cools down. To place it on a
heat-resistant surface is highly recommended.
3 Remove hairs and dust from the barrel and clip.
4 Clean the barrel and the clip with damp cloth.
5 Keep it in a safe and dry place, free of dust. You can also hang it with
the hanging loop ( ).
Advertisement
