Advertisement
Styling Tips
•
Use lower temperature of the recommended range if your hair is
dyed or permed. If you apply a flexible hair spray which is strongly
recommended, you can reduce the suggested temperature by
another 10°C.
•
Choose shorter recommended curling time for loose, natural
looking curls and waves and longer recommended time for tight,
well-defined curls.
» The heating up time is indicated by blinking temperature numbers.
» If the temperature indication stays stable, the curler is ready for use.
If the buttons of the appliance are not operated for 5 seconds, the
Key Lock is activated automatically (the first automatic activation after
switching on the appliance is after 15 seconds). To unlock the appliance,
press the Time Switch for Curl Ready Indicator for 1 second.
Usage
Note
•
If this is your first-time-use with a clip-less curler try out these steps without
switching the device on first to get some practice.
•
If you want to change the temperature or time setting during application, you
might have to deactivate the Key Lock by pressing the Time Switch for Curl
Ready Indicator.
•
Never touch the hot barrel with your fingers.
•
Only use the appliance on dry hair.
3 Brush to de-tangle your hair. Depending on your desired result, take
a hair strand between 2cm and 4cm (for loose waves take a thicker
strand, for tight curls take a thinner strand).
4 Hold the curler horizontally and point it away from your head and
face. Start at the widest point of the barrel, place the curler near the
roots of the section and wrap the hair around from root to tip.
Advertisement
