MSB Technology Network Renderer User Manual page 96

24.
Click on the Media Renderers tab. This will show your UPnP Media Renderers on the
network. MSB Network Renderer will show as its default name of Audio or MSB Tech
Renderer-X, where X is the last digit of the IP Address given to the MSB Renderer by your
router.
 Select the MSB Tech Renderer.

Click on the checkbox to Create an OpenHome renderer

Change the Name according to your preference

Change the Room according to your preference

Check on the checkbox for Gapless playback
Note: Because your ohMedia controllers will see both the UPnP Renderer and the
emulated UPnP ohMedia Renderer version it is useful to put a prefix or suffix denoting
the ohMedia emulation. In this example, OHM was added to the name.
96