Connecting To Network - DMTech IR-7000 Instruction Manual

Connecting to Network

Step 1 - Power up Radio
Connect the power adapter to connect the DC Jack on the side of the unit. After this connection is
made, insert the power adapter into the wall outlet, in use, radio can be switched on or off by
pressing .
Later, it will say:
Step 2 – Access to Network

If your network is not configured to request a password (WEP/WPA), radio will connect to the
network and display:

In some cases it may find more than one network. Press
press when the name of your favor network is displayed.

If a WEP/WPA key (password) is required, radio will display as following:

Press or to your favour Router, and then press
or to cycle through the name list,
to confirm.
6