Hyundai Genesis Coupe 2009 Owner's Manual page 174

1. FM/AM Selection Button
Turn to FM or AM mode, and toggles in
the order of FM1 FM2 AM
➟ ➟
when the button is pressed each time.
2. CD Selection Button
If there is a CD in the CDP DECK, it
switches from the previous mode to CD
mode and plays the song. If there is no
CD, then it displays the message "No
Media" and returns to the previous mode.
3. SEEK TRACK UP/DOWN Button
When the [SEEK / ] button is
pressed, it increases / decreases the
band frequency by 200kHz to automati-
cally select channel. Stops at the original
frequency if no channel is found.
4. AUX Selection Button
If a device is connected to AUX then it
toggles.
USB AUX USB... when the button is
➟ ➟
pressed each time.(It will not turn to AUX
if the auxiliary device is not connected.)
5. AST(AUTO STORE) Button
When AST is pressed, frequency is stored
FM1... on the preset memory [1]~[6] and auto-
➟
matically plays the channel stored on the
Preset [1].
If no channels have been stored because
there was no channel received, will return
to the previous channel.
6. Display
Displays the current time, mode, frequen-
cy AST status and preset channel.
7. Preset Button
Press [1] ~ [6] buttons less than 0.8 sec-
ond to play the channel saved in each
button. Press [1]~[6] button more than
0.8 second or longer to save current sta-
tion to the respective button with a beep.
8. DISP Selection Button
Turns on/off the displayed data and light
on LCD.
Features of your vehicle
9. TUNE FILE UP/DOWN Button
When the [TUNE / ] button is
pressed, it increases / decreases the
band frequency by 200kHz from current
frequency.
10. SETUP Button
Press the button to change the CLOCK,
TONE, POSITION, AVC, TEMP and
SCROLL option modes.
11. Power ON/OFF Button &
Volume Control Knob
Turn on/off the set When the IGNITION
SWITCH is on ACC or ON. If the button
is turned to the right, it increases the vol-
ume and left, decreases the volume.
4 113