Dometic FreshWell 3000 Instruction page 9

FreshWell3000
!
CAUTION! Beware of injury
• Improper installation of the under-bench air conditioner can result in
irreparable damage to the device and put the safety of the user at
risk.
• The manufacturer assumes no liability for malfunctions and for the
safety of the under-bench air conditioner, especially for injury and/or
damage to property, if the under-bench air conditioner is not fitted in
accordance with these installation instructions.
• Always wear the recommended protective clothing (e.g. protective
goggles, gloves).
A
NOTICE! Beware of damage
Observe the structural engineering of the vehicle and seal of all open-
ings made when installing the under-bench air conditioner.
Note on transport
• Always have someone help you carry the under-bench air conditioner.
• Always lift the under-bench air conditioner to move it and never drag it over the
floor (fig. 2 A).
• Do not use the ventilation slots to lift it (fig. 2 B).
Note on installation location
• To install the machine it is necessary to create openings in the floor. These open-
ings must be accessible and must not be covered by any parts of the vehicle.
• Before installing the under-bench air conditioner, check whether any vehicle
components could be damaged by the installation of the under-bench air
conditioner (such as lamps, cupboards, doors).
• Make sure no combustible objects are stored or installed near the air outlet. A
distance of at least 50 cm should be kept.
• The inclination of the installation surface may not exceed 10°.
• For safety reasons, note the location of existing wiring harnesses, wires and other
components within the installation area, in particular those which are not visible,
when installing the under-bench air conditioner (when drilling or screwing etc.).
• To obtain the optimal air-conditioning in the vehicle, install the under-bench air
conditioner in a central position, in a compartment or a similar housing.
• Choose a place that is easily accessible for servicing as well as disassembling and
installing.
EN
Installation
7