Advertisement
Advertisement
Table of Contents
Related Manuals for Wahl HorseLine AVALON
Summary of Contents for Wahl HorseLine AVALON
-
Page 2: Table Of Contents
2. INDEX Please read all instructions carefully to familiarize yourself with the Wahl Clipper before using. THIS CLIPPER IS INTENDED FOR HOUSEHOLD USE ONLY. Save these instructions for further reference. For any further assistance or information call customer services on... -
Page 3: Essential Information
3. ESSENTIAL INFORMATION ESSENTIAL INFORMATION For maximum efficiency, durability and satisfaction from these products, please note the following points:- Prior to using either the Avalon or the Adelar, ensure you charge the battery pack for a minimum of 3 hours or until the light on the unit flashes. Always ensure the horse’s coat is dry, as clean as possible and brushed thoroughly to remove grease and dirt particles from the hair. -
Page 4: General Advice On Clipping & Trimming
4. GENERAL ADVICE ON CLIPPING & TRIMMING GENERAL ADVICE ON CLIPPING & TRIMMING When working with horses Wahl recommend that you use a circuit breaker when connecting any electrical appliance directly into an electric socket. Ensure the horse is dry, as clean as possible and brushed thoroughly. -
Page 5: Avalon
N – Oil for Blade Set O – Carrier Belt Before each use, always oil the blades, using Wahl Clipper Oil. When clipping horses coats for long periods of time, the cutting blades must be cleaned and re-oiled at regular intervals. - Page 6 6. AVALON NOTE ON Ni-MH BATTERIES This battery pack contains environmentally-friendly metal hybrid batteries that are free from lead, cadmium and mercury. A prolonged storage period with too low a charge status can have a negative effect on the lifetime of the battery. For this reason, if you do not use your machine for a longer period of time (2-3 months), you should fully charge the battery pack before an extended storage period.
- Page 7 ATTACHING THE BLADE SET For detailed blade instructions see page 15/16 For optimum performance we recommend that blades produced by Wahl or Moser are used with the Avalon clipper. Ensure the clipper is switched off. The snap-on blade should be placed onto the clip (Fig 5a).
- Page 8 Operating your clipper without full battery power or blunt blades may damage the motor and will impede the performance. Wahl recommend that this product is serviced by a qualified technician regularly to maintain performance and efficiency. (Manufacturer contact details on page 18.) The clipper case may be cleaned with a soft cloth, which may be dampened slightly.
-
Page 9: Artiko
OPERATING INSTRUCTIONS Ensure the clipper is switched off before connecting to the mains. Connect the clipper to the mains. Wahl recommend the use of a circuit breaker when using this clipper with horses. Attach the blade onto the clipper following the instructions in this booklet Ensure the blade is oiled before switching the clipper on. - Page 10 ATTACHING THE BLADE SET For detailed blade instructions see Page 16 For optimum performance we recommend that only blades produced by Wahl or Moser are used with the Artiko clipper. Ensure the appliance is switched off. The snap-on blade should be placed onto the clip (Fig 3a).
- Page 11 11. ARTIKO Wahl recommend this product is serviced by a qualified technician regularly to maintain performance and efficiency. (Manufacturer contact details on page 18.) CLEANING THE AIR FILTER To ensure a good supply of air to the motor it is essential that the air filter is cleaned regularly.
-
Page 12: Adelar
12. ADELAR DESCRIPTION OF PARTS A – Blade Set B – On/Off Switch C – Battery Level Display D – Battery Pack E – Battery Charger F – Cable Compartment G – Charge indicator H – Quick Release Battery Pack I –... - Page 13 Never use a blade that is damaged in any way as this may cause injury. Always switch the appliance off when you have finished using it. ATTACHING THE BLADE SET For optimum performance we recommend that blades produced by Wahl or Moser are used with the Adelar trimmer. Ensure the trimmer is switched off.
- Page 14 If the cutting performance deteriorates after long use despite regular cleaning and oiling, the blade set should be replaced. Wahl recommend that this product is serviced by a qualified technician regularly to maintain performance and efficiency. (Manufacturer contact details on page 18.) WIRING Warning: This product must only be used with the charger unit supplied.
-
Page 15: Blade Care
NB. The application of oil to a stored blade will eliminate the risk of pitting or rust damage caused by moisture in the atmosphere. Only replace a blunt or damaged blade set with Wahl or Moser blades. Replacements may be ordered through your dealer, service centre or from Wahl (UK) Ltd. - Page 16 Do not separate the top and bottom blades even when cleaning. This will affect the factory set tensioning and may reduce performance. Wahl recommend that only oil specifically designed for use with clippers is used to lubricate the clipper blades.
-
Page 17: Important Safeguards
Never carry the unit by its power cord. Use this appliance only for its intended purpose. Apart from when charging, always disconnect from the mains after use. When using an electrical appliance around animals Wahl recommend the use of a circuit breaker to minimize risk. -
Page 18: Weee/Guarantee
This guarantee in no way affects your rights under statutory law in the United Kingdom. CONTACT Wahl (UK) Ltd Customer Services Department 01227 744330 / 740066 For technical advice, service, blade sharpening and replacement parts. www.wahlstore.co.uk For online ordering. -
Page 19: Problem Solving Guide
19. PROBLEM SOLVING GUIDE Clipper will not operate Avalon Ensure the battery is fully charged and the mains adaptor is working correctly Ensure the plug from the clipper is fully inserted into the battery pack Artiko Ensure the mains power supply is working correctly Check the fuse in the plug –... - Page 20 WAHL (UK) LIMITED HERNE BAY TRADE PARK, SEA STREET HERNE BAY, KENT, CT6 8JZ. TECHNICAL SUPPORT TEL: 01227 744331 CUSTOMER CARE TEL: 01227 740066 www.wahl.co.uk Form No. ZB032 Rev1-02/12...