Wireless Remote Controller - Mitsubishi Electric PUZ-A NHA Series Service Manual

Wireless remote controller

OPERATION MODE display
OPERATION MODE display
Indicates which operation mode is in effect.
display
The vertical direction of air flow is indicated.
display
Displays selected fan speed.
ON/OFF button
The unit is turned ON and OFF alternately
each time the button is pressed.
FAN SPEED SELECT button
Changes the fan speed.
MODE SELECT button
Switches the operation mode between
COOLING/DRY/FAN/HEATING and AUTO
mode.
wIn case the outdoor unit is cooling only
type, the heating and auto mode are not
available.
CHECK-TEST RUN button
Performs an inspection check or test opera-
tion.
Do not use it for normal operation.
VANE CONTROL button
Changes the air flow direction.
display
CHECK TEST RUN
Indicate that the unit is being checked or
test-run.
display
MODEL SELECT
Blinks when model is selected.
TEST
CHECK
COOL
RUN
MODEL
DRY
SELECT
STOP AMPM
AUTO
FAN
SWING
FAN
START AMPM
HEAT
NOT AVAILABLE
ON/OFF TEMP
FAN AUTO STOP
MODE VANE AUTO START
CHECK LOUVER
TEST RUN
SET RESET CLOCK
7
Lights up while the signal is transmitted to
the indoor unit when the button is pressed.
Temperature setting display
indicates the desired temperature setting
which is set.
CLOCK display
Displays the current time.
˚F
Displays when in timer operation or when
˚C
setting timer.
"
Displays the order of timer operation.
"
Displays whether timer is on or off.
Sets any desired room temperature.
TIMER CONTROL buttons
AUTO STOP (OFF timer): when this switch
h
is set, the air conditioner will be au-
tomatically stopped at the preset time.
min AUTO START (ON timer): when this switch
is set, the air conditioner will be automatical-
ly started at the preset time.
"h" and "min" buttons
Buttons used to set the "hour and minute" of
the current time and timer settings.
LOUVER button
Changes left / right airflow direction.
(Not available for this model.)
display
TIMER display
" " " display
" " " display
button
CLOCK button
RESET button
SET button