Next steps
1. Replace the
battery
2. Replace the
base cover
3. Replace the
optical drive assembly
4. Replace the
SD memory card
5. Follow the procedure in
Ekraanisõlm
Removing the display assembly
Prerequisites
1. Follow the procedure in
2. Remove the
SD memory card
3. Remove the
optical drive assembly
4. Remove the
base cover
5. Disconnect the battery cable from the connector on the system board
6. Remove the
WLAN
Steps
1. Open the latch and disconnect the optical drive cable and display cable from the system board [1, 2].
2. Peel off the tape securing the wireless antenna from the system board [3].
3. Unroute the display cable from the routing guides on the palmrest and keyboard assembly [4].
48
Komponentide eemaldamine ja paigaldamine
after working inside your computer
before working inside your computer