Next steps
1. Replace the
SSD
2. Replace the
battery
3. Replace the
base cover
4. Replace the
optical drive assembly
5. Replace the
SD memory card
6. Follow the procedure in
S-/V-paneel
Removing the IO board
Prerequisites
1. Follow the procedure in
2. Remove the
SD memory card
3. Remove the
optical drive assembly
4. Remove the
base cover
5. Remove the
battery
6. Remove the
hard drive assembly
Steps
1. Disconnect the VGA cable from the I/O board [1].
2. Open the latch and disconnect the I/O board cable from the system board [2].
after working inside your computer
before working inside your computer
Komponentide eemaldamine ja paigaldamine
41