Write Text; Traditional Text Input; Predictive Text Input - Nokia 6730 classic User Manual

Hide thumbs Also See for 6730 classic:
Table of Contents

Advertisement

Write text

Traditional text input

is shown on the top right of the display when you are
writing text using traditional text input.
and
indicate the selected case.
that the first letter of the sentence is written in uppercase
and all the other letters are automatically written in
lowercase.
indicates the number mode.
To write text with the keypad, press a number key 2-9
repeatedly until the desired character appears. There are
more characters available for a number key than are printed
on the key. If the next letter is located on the same key as the
present one, wait until the cursor appears, and enter the
letter.
To insert a number, press and hold the number key.
To switch between the upper and lower case mode and the
number mode, press #.
To erase a character, press the clear key. Press and hold the
clear key to erase more than one character.
To erase a character, press the backspace key. Press and hold
the backspace key to erase more than one character.
To access the most common punctuation marks, press the 1
key. Press 1 repeatedly to reach the desired punctuation
mark.
34
To add special characters, press *. Scroll to the desired
character and press the scroll key.
To insert a space, press 0. To move the cursor to the next line,
press 0 three times.
indicates
To switch between the different character cases, press #.

Predictive text input

1. To activate predictive text input, press # twice quickly.
This activates predictive text input for all editors in the
device. The indicator
2. To write the desired word, press 2-9. Press each key only
once for one letter.
3. When you have finished writing the word and it is correct,
scroll right to confirm it, or press 0 to add a space.
If the word is not correct, press * repeatedly to view the
matching words the dictionary has found.
If the ? character is shown after the word, the word you
intended to write is not in the dictionary. To add a word
to the dictionary, select Spell, enter the word (up to 32
letters) using traditional text input, and select OK. The
word is added to the dictionary. When the dictionary is
full, the new word replaces the oldest added word.
Write the first half of a compound word; to confirm it, scroll
right. Write the last part of the compound word. To complete
the compound word, press 0 to add a space.
is shown on the display.
© 2009 Nokia. All rights reserved.

Advertisement

Table of Contents
loading

Table of Contents