To Change The Display; To Use A-B Repeat Mode; Adding Or Removing Mp3 Files; Navigating The Menus - Apacer Technology Audio Steno AU524 User Manual

4.6

To change the display:

1. Select Display from the sub-menu, then briefly press
2. Briefly press
motion or Stereo.
3. Briefly press
4.7

To use A-B repeat mode:

1. Select A-B from the sub-menu, then briefly press
2. Briefly press R/V to select the A point.
3. Briefly press R/V to select B point.
4. Briefly press R/V to cancel A-B repeat mode.

5 Adding or removing MP3 files

To add files to or remove files from the MP3 player:
1. Insert the USB plug to a USB port in your computer.
2. Locate the MP3 storage folder.
3. Add or remove MP3 files to or from the storage folder.
4. Close the storage folder, then right click on
5. Follow screen instructions for safe removal of USB peripherals.
6. Disconnect the MP3 player from the USB port.

6 Navigating the menus

Refer to the table of button functions below when navigating the main menu.
Do this
Press M*
Press
Press or
* Press and hold M to check the microSD card mode. If you see it is in the
microSD card mode, if you see
more details please refer to section 10.7 Storage.

7 Adjusting the volume

To adjust the volume when in play or RPL mode, briefly press R/V, then briefly
press to increase the volume or

8 Recording voice

To create voice recordings:
1. Briefly press M to enter the main menu.
2. Briefly press
3. Press and hold R/V to start recording.
or to select from three display options: Off, Wave
button to confirm.
Enter main/sub-menu or return to the previous menu
Confirm menu selection
Shift menus
, you are in the onboard flash mode. For
to decrease the volume.
or to select RPL mode, then press
6
.
.
from the taskbar.
To
to confirm.