Freeview MyFreeview satBox S8200 Quick Install Sheet

S8200 Quick Install Sheet
Thank you for choosing Dish TV for your MyFreeview Satellite Recorder. This Quick Start Guide will provide you
with instructions for connecting and troubleshooting your new unit. Please check that your Dish TV box contains all the
components shown under "What's in the Box?"
Dish TV S8200
sat
S8200
Power/Standby Button
Getting Connected:
Connect the cable that comes from your Dish to the SAT1IN socket
Cable between LOOP OUT and SAT2IN sockets.
and white sockets on the back panel of the unit and your TV, or you can just use an HDMI cable if you have one.
USB Port
SAT IN/LOOP OUT
Getting Started:
1 - Open the battery cover of the remote control insert the two AAA size batteries so the + and - marks on the batteries
match the + and - marks inside your remote. Replace the battery cover.
2 - Switch your TV on and select the video input you have connected your S8200 to. Now switch the S8200 on and wait
for it to boot up (it should take approx. 30 seconds).
3 - You will get the "Loop Cable Installation" screen first, press OK if installed, "Welcome First Time Installation" screen
should now show up, please follow all on screen instructions to finalize the set up of your MyFreeview Satellite Unit.
For further details on operating your S8200 unit, please refer to the User Manual under, Main Menu > Installation.
What's in the box?
Please check to see whether you have all the following in this box, you should have:
Your new set top box
The S8200 is a MyFreeview Satellite Recorder. It requires a Satellite Dish & good signal levels to operate correctly. It does not use an Aerial.
For further help, please refer to the Technical Support Contact Details under the Main Menu > Installation > System Info.
Functions
Connect the AV cable that came with your unit between the yellow, red
Composite 12V DC Port
ETHERNET
HDMI Port
Some items missing? Please contact the retailer or store you purchased this from.
Red/Green Power LED
on the back of your set top box.
12V 2.5A
Ethernet WiFi
Remote Control (2x Batteries)
sat
FRONT PANEL
Digital Satellite Recorder
Connect the Loop
REAR PANEL
Install Sheet Loop Cable
AV Cables
Power Supply