Philips HP4992/29 User Manual page 11

go to your local Philips dealer or contact the Service Department of
Philips Domestic Appliances and Personal Care BV.
troubleshooting
If problems arise with your hairdryer and you cannot solve them with the
information below, please contact the nearest Philips service centre or
the Philips Customer Care Centre in your country.
Problem
The
appliance
does not
work at all.
Cause
Perhaps the socket
to which the
appliance has been
connected is not
live.
The appliance may
have overheated
and switched itself
off.
The appliance may
not be suitable for
the voltage to which
it has been
connected.
The mains cord of
the appliance may
be damaged.
Solution
Make sure the socket is live.
Unplug the appliance and let it
cool down for a few minutes.
Before you switch on the
appliance again, check the grilles
to make sure they are not
blocked by fluff, hair etc.
Make sure that the voltage
indicated on the type plate of the
appliance corresponds to the
local mains voltage.
If the mains cord is damaged, you
must have it replaced by Philips, a
service centre authorised by
Philips or similarly qualified
persons in order to avoid a
hazard.
EnglisH
11