Philips HP2845/24 User Manual page 9

speed) (fig. 7).
- Pull the skin taut with your free hand to make the hairs
stand up (fig. 8). Tautening the skin properly is particularly
important if you have sensitive or delicate skin.
- Place the Satinelle in a straight angle on the skin, with the
On/Off switch pointing towards you (fig. 9).
- Now move the appliance slowly over the skin against the
direction of growth of the hairs (fig. 10). Do not apply
pressure.
- To switch the appliance off, slide the switch to position 0
(fig. 11).
Cleaning
• For a good and smooth result in epilating, it is essential
that the epilating head is cleaned after each use.
• Never immerse the appliance in water.
• Do not use strong cleaners or scouring agents, petrol,
acetone, etc., to clean the plastic housing of your
Satinelle.
• Never try to remove the epilating discs from the
appliance.
- Switch the Satinelle off (0) (fig. 12) and remove the mains
plug from the wall socket (fig. 13). (Please note: The
mains plug shown in the illustration is not applicable for
U.K.)
- Press the ribbed section and pull the epilating head from
the appliance (fig. 14).
- Clean the epilating discs and the parts that have become
accessible with the brush (fig. 15).
9