PHASE 1 – ASSEMBLY
1.2 DRAWER CABINET ASSEMBLY
1.2.1 • Remove all the PVC from all the parts.
• If you have mounting kits attach the mounting track installation brackets.
40-441
For technical support, contact us at 1-800-565-5321
5060-5
NOTE: Don't do this step if you don't
have mounting kits or
mounting track.
HARDWARE USED
4×
-
hand
tighten the bolts
#90-204 Hex Bolt 5/16" × 3/4"
#98-116 Flat Washer
#94-116 Serrated Nut
5060-5 Installation Guide | REV. E1 | Page 5
40-441