Advertisement
2.1.5 • Lift the drawer cabinet on the side.
• Drill all the marks using 3/8" drill bit, then attach plus nuts to the holes.
NOTE: Before drilling, ensure that you will not hit any critical parts of the vehicle like the Gas tank,
Wiring Harness and Hose.
For technical support, contact us at 1-800-565-5321
Drill all the marks using 3/8" drill bit.
NOTE: If the vehicle has wood or rubber floor,
drill the floor using 1" hole saw, then
drill the vehicle floor using 3/8" drill bit.
TOOLS
q Cordless Drill
q 3/8" Drill Bit
q 1" Hole Saw
Attach plus nuts to the holes.
TOOLS
q Plus Nut Tool
HARDWARE USED
12×
#94-130 Plus Nut .250
5060-5 Installation Guide | REV. E1 | Page 10
Advertisement
