3.2
System Architecture
3.3
Tool And Development Environment Setup
3.3.1
Configure Wi-fi setting through BLE
BLE-WiFi introduction service is a demo for setting up SSID and password to join the
network via smart phone. EPD-132 will be paired via a BLE GATT server with the
smartphone.Then you can start Wi-Fi security setting.
1.
Install and launch the BLE Scanner app on iOS or Android.
2.
Pull down the screen to rescan devices and it will list nearby BLE devices. Find
the "WiFiInt" device and press the CONNECT button.
27
EPD-132 Development Kit User Manual