Philips HP5224/01 User Manual page 4

English
Important
• When using the appliance without water
ensure that the warming switch (B) is set
to position O.
• Read the instructions for use in
conjunction with the illustrations before
using the appliance.
• Check if the voltage indicated on the
appliance corresponds to the mains
voltage in your home.
• Keep the appliance out of children's
reach.
• Do not use the appliance in the bathroom.
• Ensure that your hands are dry when
touching the switches and the mains
plug.
• Do not stand on the massaging plate!
Sit down first. Then place your feet on the
massaging plate.
• Only use the appliance for the purpose
described in the instructions for use and
in the prescribed manner.
• Do not use the appliance if you have
inflammations, skin disorders, injuries,
burnt skin, reduced feeling in your feet,
etc. When in doubt, consult your doctor.
• Remove the appliance plug from the wall
socket before filling, emptying or
cleaning.
• Do not immerse the appliance in water.
Do not rinse either.
• Do not use the appliance if it has been
dropped and/or if it is damaged or
defective. Visit your dealer or a Philips
Service Centre to have your appliance
checked and if necessary repaired.
• If the mains cord of this appliance is
damaged, it must only be replaced by
Philips or their service representative, as
special tools and/or parts are required.
This massager is wonderful for aching and
overstrained feet.
It can be used as a
- warmed foot-bath with massage;
- warmed foot-bath without massage;
- dry foot massager.
Massaging relaxes the muscles and improves
the blood circulation in muscular tissue. This
relieves the tired feeling and in many cases it
also stimulates quick recovery. The cleated
massaging plate and the warm water will
enhance the effect of the massage.
The refreshing water will make nails, cuticles
and horny skin soft and thus ready for
pedicure.
You can also add bath salts or similar
products to the water.
General description
Massage switch
A
Warming switch
B
Warming indicator light
C
Maximum water level indication
D
Cleated massaging plate
E
Massaging tip
F
Cord storage
G
Spat guard
H
How to use
When using the appliance as a dry massaging
machine (without water) only set the massage
switch (A);
the warming switch (B) must then remain in
position O.
4
(fig. 1)
0 0
0 0