Cleaning
IMPORTANT
◗
Always switch the Satinelle Epilator to
OFF position "O" and remove plug from
electrical outlet before cleaning (Fig. 7).
◗
It is essential for hygienic reasons and
optimum performance that the epilating head
and rotating discs are cleaned after each use.
◗
Never immerse this appliance in water.
◗
Never clean, remove, or replace epilating head
or rotating discs while motor is ON.
The rotating discs are not removable from
the appliance.
◗
Do not apply pressure or touch rotating discs
with hard objects as this may dent or damage
the discs. If damage occurs, discontinue use
immediately.
◗
Do not use strong or abrasive cleaners or
acetone to clean the housing/body of Satinelle
Epilator.
1
Remove the epilating head by pushing the
ribbed section with your thumb and lifting
the epilating head off the appliance (Fig. 8).
2
Clean the epilating discs and all other
accessible parts with the brush.
Never try to detach the epilating discs from the
appliance.
3
Place the epilating head back onto the
appliance. Press the non-marked side
opposite the ribbed section so the
epilating head snaps back into position.
(Fig. 9).You will hear a click.
The epilating head only fits onto the appliance
in one way.
This appliance has no other user-serviceable
parts. Any other service should be performed by
an Authorized Norelco Service Location.
Product Assistance
For Assistance or the Authorized Norelco Service
Location nearest you, call toll free:
1-800-243-3050
or visit our website: www.norelco.com
Authorized Norelco Service Location information
is available 24 hours a day, 7 days a week.