Table of Contents
Advertisement
Speed Settings
◗
For the areas where the hairs are thinner,
hard-to-reach places and areas with bones
close to the skin's surface (such as knees and
ankles), select speed I (normal speed) (Fig. 2).
◗
For larger surfaces and thicker hair areas,
select speed II (high speed) (Fig. 3).
◗
For areas with bones close to the skin's surface
(knees, ankles), select the normal intensity.
3
Keep the skin taut using your fingers to
stretch the skin so the rotating discs can
grasp hairs (Fig. 4).
4
Hold the Satinelle Epilator perpendicular to
your leg with the ON/OFF Slide Switch
pointing in the direction you are going to
move the appliance (Fig. 5).
5
Gently press and move the Satinelle Epilator
slowly over the skin against the direction of
hair growth (Fig. 6). If you press too lightly
or too hard, the Satinelle Epilator will not be
able to grasp and remove the hairs.
Experiment until you find the right settings
and right amount of pressure for your type
of skin and hair.
6
To switch the System OFF, slide the ON/OFF
Switch to the "O" position (Fig. 7).
NOTE: If you choose to use a cream or
moisturizing lotion after use, be certain it
does not contain alcohol as it may cause
discomfort.
IMPORTANT:
◗
After using the Satinelle Epilator, some redness
or irritation may occur. This is normal and
should disappear quickly.
◗
It is recommended this appliance be
used dry on legs only.
◗
Clean the appliance regularly following
CLEANING instructions.
Advertisement
Table of Contents
