Advertisement
• For optimum epilation the hairs should be not too long (max. approx.
1/2 cm).
- Take off the pain softener element for the legs (F) (fig. 13).
- Place the special pain softener element ' (G) for under-arms and
bikini-line (fig. 14).
- Place the precision cap (fig. 15). (Please note the correct positioning
of the cut-away for the pain softener.)
- Switch on. We advise you to use speed || and pain softener intensity Ó
(fig. 16).
- Ensure that the skin is drawn taut.
- Place the Satinelle in a straight angle on the skin, with the on/off switch
pointing in the direction in which you wish to move the appliance
(fig. 17, 18).
- Move the appliance slowly over the skin, against the direction of the
hair growth (fig. 10).
• It can be nice to cool the skin after use with a cloth soaked with water.
Cleaning
• For a good and smooth result in epilating, it is essential that the
epilating head is cleaned after each use.
• Never immerse the appliance in water.
The pain softener element can be removed and washed or rinsed
separately.
• Do not use strong cleaners or scouring agents, petrol, acetone, etc.,
to clean the plastic housing of your Satinelle Sensitive BodyTotal.
• Never try to remove the epilating discs from the appliance.
- Unplug the appliance.
- Remove the precision cap (fig. 19).
- Remove the pain softener (fig. 20) and the epilating head (fig. 21).
- Clean all accessible parts with the brush.
- Pain softener: clean the rubber teeth under the tap with the brush
(fig. 22).
- Epilating head: clean the discs with the brush (fig. 23).
- First place the epilating head (fig. 24) and then place the pain softener
back onto the appliance (fig. 25).
8
Advertisement
