Advertisement
Available languages
Available languages
Problem
The appliance
does not work.
Skin irritation
occurs.
The cooling
glove is not
cold enough.
Cause
You moistened
your skin with
water or a
cream or other
skincare
product prior
to epilation.
The socket to
which the
appliance is
connected is
not live.
The appliance is
not switched
on.
You did not
attach the
epilating head
correctly.
You used the
epilator for the
first time or
after a long
period of
disuse.
You did not put
the ice gel pad
in the freezer or
freezing
compartment.
Solution
Make sure your skin is entirely dry
and free from grease. Do not put
any cream, body milk or other
skincare product on your skin
before you start to epilate.
Make sure the socket you use is
live. If you use a socket in a
bathroom cabinet, you may need
to switch on the light to activate
the socket.
Make sure that the appliance is
plugged in and switched on.
Place the epilating head on the
appliance and press it onto the
appliance until it snaps home
('click').
Some skin irritation may occur the
first few times you use the
appliance. This is absolutely normal
and usually disappears quickly. For
tips to reduce skin irritation, see
the first section of chapter 'Using
the appliance'. Also make sure you
keep the epilating head clean.
Put the ice gel pad in the freezer or
freezing compartment (***) for at
least 2 hours. Do not store the ice
gel pad in the refrigerator.
EnglisH
15
Advertisement
