Table of Contents
Advertisement
6
Things You Should Know
6-A Battery
Recharge
When the RECHARGE indicator flashes or the
unit beeps intermittently, place the handset on
the base unit to recharge the battery for 6 hours.
•If you DO NOT recharge the handset battery for more than 15
minutes, the RECHARGE indicator will continue to flash.
Battery information
After your Panasonic battery is fully charged:
Operation
near the base unit*
While in use
(TALK)
away from the base unit
While not in use (Standby)
*Within about 10 feet (3 m)
•Battery life may vary depending on usage conditions and ambient
temperature.
•Clean the handset and the base unit charge contacts with a soft dry
cloth once a month. Clean more often if the unit is subject to grease,
dust or high humidity. Otherwise, the battery may not charge properly.
•If the battery is fully charged, you do not have to place the handset on the
base unit until the RECHARGE indicator flashes. This will maximize the
battery life.
•The battery cannot be overcharged.
6-B Battery Replacement
If the RECHARGE indicator flashes after being fully charged, replace the
battery with a new Panasonic P-P510 (N4HKGMB00001) battery.
1
Carefully insert a flat
metal object in the slot,
and push forward to
release the lock.
Remove the cover.
2
Replace the battery.
Place the battery leads
inside the groove,
otherwise the leads
may be damaged when
closing the cover.
3
Close the cover.
Make sure to charge
the new battery for 6
hours.
Attention:
The product you have purchased is powered by a
nickel-cadmium battery which is recyclable.
Please call 1-800-8-BATTERY for information on
how to recycle this battery.
RECHARGE
Indicator
Approx. battery life
Up to 4.5 hours
Up to 3.5 hours
Up to 11 days
Push
forward.
1
2
6-C Optional Headset
Plugging an optional headset into the handset allows a hands-free phone
conversation. Please use only the Panasonic KX-TCA88C headset.
Connecting the optional headset to the handset
Open the headset jack cover, and connect the optional headset to the
headset jack as shown.
When the optional headset
is connected to the
handset, make sure to use
the headset to talk with the
caller. If you want to have a
normal cordless phone
conversation, disconnect
the headset.
6-D Base Unit Location/Noise
Calls are transmitted between the base unit and the handset using wireless
radio waves. For maximum distance and noise free operation, the
recommended base unit location is:
Away from electrical appliances
such as a TV, personal computer
or another cordless phone.
Raise
the antennas.
Note:
While using the handset:
— If you are near a microwave oven which is being used, noise may
be heard at the receiver. Move away from the microwave oven
and closer to the base unit.
— If more than one cordless phone is being used and your handset
is near another cordless phone's base unit, noise may be heard.
Move away from the other cordless phone's base unit and closer
to your base unit.
6-E Adding Another Phone
This unit will not
Standard Telephone
function during a
power failure. To
connect a standard
telephone on the
same line, use a
T-adaptor.
Single-Line
Telephone Jack
H
Headset Jack
In a HIGH and CENTRAL location
with no obstructions such as walls.
Telephone
Line Cord
T-Adaptor
Advertisement
Table of Contents
