Samsung MCU Series Installation Manual page 20

Wiring works
4. MCU address and 2. Wireled remote controller
port setting for
- Setting for MWR-WE11N
indoor unit
- Setting for MWR-SH10N
Main menu
3. Setting by using S-NET Pro 2
20
1) Press the Delete and Set buttons at the same time for more than three seconds. Then you will
enter the additional function settings, and the [main menu] will be displayed.
2) Assign an indoor unit MCU port address with main menu 4, sub menu 7 (MCU address is
assingned to SEG 12, Port address is assinged to SEG 4) If you want to know the detailed
operation of MWR-WE11N , refer to installation manual for MWR-WE11N
Data bit
Main Sub-
5 6 1 2 3 4
Menu menu
1) Press the top right corner (hidden button) of the display for more than 3 seconds and drop it.
Then you can press [ + ]/[ - ] buttons and select No.3 and press [ OK ] button.
2) Assign an indoor unit MCU port address with main menu 4, sub menu 7 (MCU address is
assingned to SEG 12, Port address is assinged to SEG 4). If you want to know the detailed
operation of MWR-SH10N , refer to installation manual for MWR-SH10N
Setting
value
Sub menu
Move menu Move page
Set the pipe addresses by using Add-on > Change address on S-NET Pro 2. (For more
information, see the S-NET Pro 2 Help.)
Main Sub
menu menu
1
2
Indoor unit/
3
4 Ventilator(ERV)
option setting
4
7
Main Sub
Function
menu menu
Page
1 Target address setting
2 Main address setting/Checking
3 RMC address setting/Checking
Setting
4 4 address/ Basic option setting/Checking
option
5 Install option setting/Checking
6 Install(2) option setting/Checking
MCU address setting/checking
7
Port address setting/checking
Setting value
Function
Description
Setting/Checking the MAIN address
address (00H~4FH)
Setting/Checking the MAIN address
product option (00H~4FH)
Refer to the
Setting/Checking the
installation
installation option 1
manual of the
connected indoor
Setting/Checking the
unit/ventilator
installation option 2
(ERV)
MCU address setting/ MCU address
checking (00~15)
Port address setting/ Port address
checking (A~F)
Setting value
value
Target address of indoor
unit (Example: 20 02 1F)
0~4F
(in hexadecimal digits)
0x00~0xFE
Option code
Option code
Option code
MCU address (00~15)
Port address (A~F)
Factory
default
None
None
None
None
None
Factory
default
None
None
None
None
None