Page 2
Gemini series QIG Notes: 1. Please check all peripherals according the list before installation. To make sure that the whole unit was not damaged and lost during shipping process. If you encounter any problem, please contact your dealer. 2. Before installation, make sure all peripherals and computer have been turned off.
Page 3
Gemini series QIG Install console step: 1. Adjust rail with rear bracket to fit your cabinet 2. Install front and rear bracket on cabinet. 3. Repeat step 1~2 for the other side. 4. Push console into rails and push it to the end.
Page 4
Gemini series QIG 6. Install three screws (length = 6 mm) in rear of the console (Both sides) and finish installation. Gemini 15 / 17 / 19 Console with Modular KVM Switch Quick Installation Guide...