Table of Contents
Advertisement
MCD104-D0U-ADEULL-ENG
12/18/09
Listening to CDs
Audio CD and MP3/ WMA CD can be played back in this unit.
1. Open the Disc tray
2. Select the CD
3. Insert the CD: Label facing up.
4. Close the Disc tray
5. Select the CD function
6. Start the CD playing:
For AUDIO CD, Playback starts
automatically.
7. To stop a CD playing
Listening to CDs - More you can do
Pausing or restarting a CD
1 Press CD [] on the unit or B B / [] on the remote control during playback.
2 Press this button again to resume play.
Searching for a section within a track
Hold . bb / BB > on the unit or . bb / BB > on the remote
control during playback and release it at the point you want to listen to.
Skipping to another track (files)
Press . bb / BB > on the unit or . bb / BB > on the remote
control.
Creating your own playlist
You can play up to 20 tracks on a CD in order.
1 Insert a CD and wait for it to be read.
2 Press PROGRAM/MEMO on the remote control in stop status.
3 Press . bb / BB > on the unit or . bb / BB > on the remote
control to select a track.
4 Press PROGRAM/MEMO again to save and select a next track.
5 Press B B on the unit or B B / [] on the remote control to play the programmed
music files.
6 To clear your selection, press x x STOP (or x x ), PROGRAM/MEMO and
then x x STOP (or x x ).
1:08 PM
Page 7
ON UNIT
ON REMOTE
Z Z OPEN/CLOSE
-
D.SKIP
DISC SKIP
-
-
-
Z Z OPEN/CLOSE
CD
FUNCTION
B B
B B / []
x x
x x
STOP
Listening to your tracks (files) repeatedly or randomly
1 Press REPEAT/RANDOM on the remote control repeatedly.
Tracks will be played back repeatedly or randomly.
2 To return to normal playback, press it repeatedly to select [OFF].
Resume play
-When you resume playback after stopping it, playback starts from the
point playback stopped.
-When you Press x STOP twice and then B , the first song is played back.
About MP3/ WMA
MP3/WMA Disc compatibility with this unit is limited as follows
• Sampling Frequency : 32 to 48 (MP3/ WMA)
• Bit rate : 32 to 320 kbps (MP3), 40 to 320 kbps (WMA)
• CD-R physical format should be "ISO 9660/JOLIET"
• If you record MP3/WMA files using the software which cannot create a FILE
SYSTEM, for example "Direct-CD" etc., it is impossible to playback MP3
files.
We recommend that you use "Easy-CD Creator", which creates an ISO
9660 file system.
• Do not use special letters such as "/ : * ? " < >"etc.
• Even if the total number of files on the disc has more than 1000, it will only
be shown up to 999.
Listening to music from your external device
The unit can be used to play the music from many types of external device.
1.Connect the external device to the
AUX IN connector of the unit.
> If your TV has only one output for
audio(MONO). connect it to the
left(white) audio jack on the unit.
2. Turn the power on.
3. Select the AUX function.
4. Turn on the external device and start
it playing.
ON UNIT
ON REMOTE
-
-
POWER
1 1 /] ]
FUNCTION
AUX
-
-
7
Advertisement
Table of Contents
