Recording To Tape; Setting The Clock - LG MCD104 Manual

MCD104-D0U-ADEULL-ENG 12/18/09

Recording to TAPE

You can record a various sound source to TAPE.
1. Open the tape deck.
2. Insert a blank tape and close the
door.
3. Select a mode in which you want to
record.
4. Play back a sound source first.
5. Press
Recording starts.
6. To stop recording, press

Setting the Clock

1. Turn the power on
2. Press for at least 2 seconds
3. Choose from either AM 12:00 (for an am and pm
display) or 0:00 (for a 24 hour display).
4. Confirm your selection
5. Select the hours
6. Press
7. Select the minutes
8. Press
The clock setting is finished.
Using your player as an alarm clock
1 Turn the power on.
2 Press and hold TIMER. Each function, EX) TUNER, CD.... flashes.
3 Press SET when the function you want to be woken by is showing.
4 Choose one of them by pressing SET.
1:08 PM Page 11
ON UNIT ON REMOTE
-
x x Z Z
-
-
(CD,TUNER, ...) FUNCTION
-
B B
z z B B -
-
x x Z Z
ON UNIT
1 1 /] ]
CLOCK
. bb/BB >
SET
. bb/BB >
SET
. bb/BB >
SET
5 "ON TIME" will be displayed. Then you can set the time you want the alarm
to go on. Press . bb/BB > to change the hours and minutes and
SET to save.
6 "OFF TIME" will be displayed. Then, you can set the time you want the
function to stop. Press . bb/BB > to change the hours and minutes
and press SET to save.
7 You will be shown the volume (VOL) you want to be woken by.
Use . bb/BB > to change the volume and SET to save.
The clock icon " " shows that the alarm is set.
8 Press TIMER button 2times. You can check the setting status.
Notes:
• If you set the clock time, you can check the time by pressing CLOCK even
when the player is turned off.
• If you set the clock time and alarm, you can check the alarm icon "
pressing CLOCK even when the player is turned off.
Setting the asleep time
1 Press SLEEP repeatedly to select delay time between 10 and 180 minutes,
after the unit will be turned off.
2 To check the remaining time, press SLEEP.
3 Press SLEEP once while "SLEEP 10" is displayed, to deactivate sleep
function.
DIMMER
Press SLEEP once. The LED (Light-emitting diode) of front panel is turned off
and the display window will be darken by half. To cancel it, press SLEEP
repeatedly until dim off.
" by
11