Page 1
AirLink 2200 FAQ Page 2 What is AL2200AC? Page 2 What is dual-band? Page 3 What’s the difference between AP, Repeater and Client mode? Page 4 Setup AL2200AC as a repeater Page 6 How to setup and use AL2200AC in AP mode Page 7 How to change name and password on AL2200AC in AP mode.
Page 2
A dual-band router transmits at the 5GHz frequency in addition to 2.4GHz, hence the name dual-band. AirLink5GHz00868 AirLink00868 AirLink00868 5GHz 2.4GHz 2.4GHz 5VDC 5VDC WiFi WIFI ON / OFF Reset/WPS Internet ON/OFF Reset/WPS Internet Jensen with only 2.4GHz Jensen dual-band routers: Air:Link 1000G Air:Link 3000DG Air:Link 5000AC Air:Link 59300 Air:Link 29150 Air:Link 7000AC Air:Link 3G...
Page 3
What’s the difference between AP, Repeater and Client mode? AP (Access Point) In AP (Access Point) mode the AL2200AC will work as a wireless transmitter. In AP mode you MUST connect the AL2200AC to your wireless router using a network cable. In AP mode the AL2200AC will transmitt a wireless network on both 2.4GHz and 5GHz frequency.
Page 4
Setup AL2200AC as an repeater (page 1 of 2) In repeater mode the AL2200AC will work as an extender/repeater for an existing wireless network. If the exisiting wireless network is a dual-band (both 2.4GHz and 5Ghz) the 2200AC will be able to extend both networks at the same time.
Page 5
Setup AL2200AC as an repeater (page 2 of 2) 6. Enter the password of the existing wireless network and click next. 7. Please enter the name you want to use for the new wireless network and click Next. * This option is shown only if you selected to change the network name is step 5b. 8.
Page 6
How to setup and use AL2200AC in AP mode In AP (Access Point) mode the AL2200AC will work as a wireless transmitter. In AP mode you MUST connect the AL2200AC to your wireless router using a network cable. In AP mode the AL2200AC will transmitt a wireless network on both 2.4GHz and 5GHz frequency.
Page 7
How to change network name and password on AL2200AC in AP mode. To be to login to the main menu of AL2200AC your computer MUST be connected wirelessly to the AL2200AC and AL2200AC must connected to the wireless router/modem by cable. 5VDC WiFi ON / OFF...
Page 8
Setup AL2200AC as an Client (page 1 of 2) In Client mode the AL2200AC works as an wireless recevier. The usage for Client mode can be to connect devices that doesn’t have wireless built-in to the wireless network, like TV, setup-box, computers etc. To setup AL2200AC in Client mode you MUST connect it to your computer using a network cable.
Page 9
Setup AL2200AC as an Client (page 2 of 2) 6. Enter the password for the wireless network and click Next. 7. Please wait while the AL2200AC connects to the wireless network. 8. When you see the below screen the AL2200AC is finish setup and ready for use. Devices you connect to AL2200AC by cable will get access to internet.
Page 10
Setup AL2200AC using WPS in repeater mode WPS is a standard for easy and secure setup and connection without the need of enter any encryption key. A WPS connection is done by pushing a button on both devices, or enter a pin code. 5VDC WiFi ON / OFF...
Page 11
Setup AL2200AC using WPS in AP mode WPS is a standard for easy and secure setup and connection without the need of enter any encryption key. A WPS connection is done by pushing a button on both devices, or enter a pin code. .
Page 12
Setup AL2200AC using WPS in Client mode WPS is a standard for easy and secure setup and connection without the need of enter any encryption key. A WPS connection is done by pushing a button on both devices, or enter a pin code.. 5VDC WiFi ON / OFF...
Page 13
Where to place the AL2200ac? In order for AL2200ac to work optimally it is important the you place it so it can receive good signales from your exisiting wireless router. Please avoid placing AL2200ac inside cabinets, behind the TV, inside tv bench etc. or near other equipment that can generate electro magnetic radiation (TV, speakers, amplifiers etc.) The speed/performance you get from AL2200ac is very much depending on the quality of the received signal.
Page 14
The AL2200AC will not connect to my network! (Repeater / Client mode) If you have any problems connecting your AL2200AC please check below steps. 1. Placement AL2200AC will work partially/not work if you place it outside of the coverage of your wireless network. To see the status of the received signal on AL2200AC, please see page 15.
Page 15
AL2200AC LED 2.4GHz LED 5GHz LED WLAN status LED Power LED WPS LED LAN port LED WPS/Reset button Network port/LAN Color LED status Description Excelent signal strength Steady Signal strength 100 - 50% Slow Poor signal strength flashing <50 - 25% Blue Poor signal strength Quick...
Page 16
In order for us to give you the best help quality, please include following information in your e-mail: * Which Jensen product do you have? * Which other products do you use in combination with your Jensen product? * A full description of the problem Normally we will reply to your request within one working-day.
Need help?
Do you have a question about the AirLink 2200 and is the answer not in the manual?
Questions and answers