Correct Shoulder Strap Height; Changing The Shoulder Strap Height - osann FLUX ISOFIX Manual

EN

Correct shoulder strap height

Belt too low Belt too high Correct
Always check that the shoulder straps are at the correct height for your child.
The child's shoulders should always be below the slot for the harness.

Changing the shoulder strap height

Slide one of the harness straps off the harness connector. Then from the front of the seat, pull it
through the slot in the seat's backrest and fabric cover. Thread the harness strap back through the
next hole up or down on the seat's backrest. Re-thread the harness strap back onto the harness
connector at the back of the seat. Repeat the same process for the other harness strap. Make sure
both of the straps go through slots at the same height.