Download Print this page

Philips QT4040/00 Instructions For Use Manual page 2

Philips beard trimmer

Advertisement

Available languages

Available languages

ENGLISH
Introduction
.
Dear customer, you have made the right choice!
Your new maintenance-free Philips vacuum beard trimmer combines innovative technology and outstanding comfort of use.
The integrated vacuum mechanism absorbs cut-off hairs during use and guarantees a clean washbasin after use.
The contour-following comb, the self-sharpening cutting element and the adjustment ring for selecting hair lengths of 1.5 to 18 mm ensure excellent
cutting results and time-saving operation. The high-quality trimmer guarantees a precise and defined cut and the ergonomic shape of the appliance allows
pleasant and comfortable handling.
Your new Philips vacuum beard trimmer is excellently suited for cutting and contouring your beard and sideburns.
General description
.
A Comb attachment
B Detachable cutting unit
C Flexible hair guide
D Hair-collection chamber
E Filter
F Adjustment ring (Precision Zoom Lock`)
G On/off button
H Charging light
I Socket for appliance plug
J Powerplug
K Cleaning brush
Important
.
Read these instructions for use carefully before using the appliance and save them for future reference.
Check if the voltage indicated on the powerplug corresponds to the local mains voltage before you connect the appliance.
Only use the powerplug supplied.
The powerplug contains a transformer. Do not cut off the powerplug to replace it with another plug, as this will cause a hazardous situation.
Do not use the appliance when the cutting unit is damaged or broken, as this may cause injury.
Do not use a damaged powerplug.
If the powerplug is damaged, always have it replaced by one of the original type in order to avoid a hazard.
Make sure the appliance and the powerplug do not get wet.
Keep the appliance out of the reach of children.
Use, charge and store the appliance at a temperature between 15cC and 35cC.
This appliance is only intended for trimming the human beard. Do not use it for any other purpose.
Charging
.
Charge the appliance fully before you start using it for the first time or after a long period of disuse.
1
Make sure the appliance is switched off before you start charging it.
2
Insert the appliance plug into the appliance and put the powerplug in the wall socket.
The charging light goes on to indicate that the appliance is charging (fig. 2).
It will take approx. 10 hours to fully charge the battery.
A fully charged appliance has a cordless trimming time of up to 50 minutes.
B
When the appliance has been charged for the first time, we advise you to use it until the battery is completely empty.
B
For a single trimming session the appliance must be charged for at least 90 minutes.
Optimising the lifetime of the rechargeable battery.
-
After the appliance has been charged for the first time, use it until the battery is completely empty.
-
Do not charge the appliance for more than 24 hours.
-
Do not keep the powerplug plugged into the wall socket all the time.
-
Do not recharge the appliance between trimming sessions.
-
Discharge the battery completely twice a year by letting the motor run until it stops. Then fully recharge the battery.
-
If the appliance has not been used for a long period of time, it must be fully recharged.
Preparing for use
.
Always comb your beard or moustache with a fine comb before you start trimming.
Using the appliance
.
Corded trimming (QT4060 only)
Do not run the appliance from the mains when the battery is fully charged.
B
If the battery is low, you can also use the appliance from the mains:
1
Switch the trimmer off, connect it to the mains and wait a few seconds before switching it on.
2
If the battery is completely empty, wait a few minutes before switching the appliance on.
Absorbing cut hairs
The suction system is activated automatically as soon as you switch the appliance on. It absorbs cut hairs during every kind of use, i.e. trimming with and
without comb attachment and contouring. The flexible hair guide follows the contours of the face and directs cut hairs towards the nozzle of the vacuum
mechanism.
4203 000 31382
2/7

Advertisement

loading

This manual is also suitable for:

Qt4060/60Qt4040/60Qt4060/00Qt4040Qt4060Tt4040/60