Firmware Version - Riedel SmartPanel 1.0 1200 Series User Manual

1200 Series SmartPanels 1.0 User Manual
1.2

Firmware Version

This Manual refers to the RSP-1232HL firmware version: 1.0.x
The "x" in the firmware version indicates the bugfix version that is described in the related release notes.
The firmware version can be checked in the SmartPanel and in the web interface:
SmartPanel
Ø
Touch the gear icon in the Info-display.
Ø
Navigate with the small bottom rotary encoder to the
menu: 'Device-Info'.
Ø
Push the small rotary encoder.
The second line in the Info-display shows the SmartPanel's
firmware and bugfix version.
6
figure 1: firmware version
(SmartPanel)
Web-Interface
Enter the IP address of the AES67 interface (Ethernet
connectors) of the SmartPanel in the web browser of a PC on
the same network.
The IP addresses of the SmartPanel are displayed
in the Panel-Menu > Network > AES67.
Open the web interface of the
SmartPanel:
·
Enter the IP address in the web
browser
(e.g. 192.168.41.159).
The firmware manager is opened.
The firmware version of the
SmartPanel is displayed next to its IP
address.
figure 2: IP address of the
SmartPanel
figure 3: web interface of the SmartPanel
figure 4:firmware version (web interface)