Advertisement
englisH
Note: Do not clean more than one cutter and
guard at a time, since they are all matching sets.
If you accidentally mix up the cutters and guards,
it may take several weeks before optimal shaving
performance is restored.
Remove the cutter from the guard (Fig. 16).
5
Clean the cutter with the short-bristled side
6
of the brush. Brush carefully in the direction
of the arrows (Fig. 17).
Clean the guard with the brush (Fig. 18).
7
Put the shaving heads back into the shaving
8
unit.
Put the retaining frame back into the shaving
9
unit and turn the orange wheel clockwise.
Put the shaving unit back onto the shaver.
10
storage
-
Put the protection cap on the shaver after use
to prevent damage to the shaving heads (Fig. 8).
Note: Make sure that the lug of the protection cap
covers the release button.
21
Advertisement
