Energy-Saving Cooling Mode (Optional); Display Luminosity (Optional); Forced Operation - LG AMNH09GAF11 Owner's Manual

Energy-Saving Cooling Mode (Optional)

Energy-saving cooling mode can save energy in cooling and healthy dehumidification operation, because it
can operate efficiently by setting body-adaptation time according to the change of time and temperature and
adjusting automatically desired temperature.
CAUTION
Because Energy-Saving Cooling Mode is optional function, some product will not operate.

Display Luminosity (Optional)

The Display Luminosity can be adjusted by using the remote control.
Open the door of the remote controller, and press the LCD LUMINOSITY button.
Display will be dark. Press the button again to set bright display.
CAUTION
Because Display Luminosity is optional function, some product will not operate.

Forced operation

Operation procedures when the remote control can't be used. The operation will be started if the ON/OFF button
is pressed. If you want to stop operation, re-press the button.
ON/OFF
button
Cooling Model
Operating mode Cooling
Indoor FAN Speed High
Setting Temperature 22°C
Test operation
During the TEST OPERATION, the unit operates in cooling mode at high speed fan, regardless of room temperature
and resets in 18 minutes.
During test operation, if remote controller signal is received, the unit operates as remote controller sets.
If you want to use this operation, Press and hold the ON/OFF button for 3~5 seconds, then the buzzer sound 1 "beep".
If you want to stop the operation, re-press the button.
1. Press the ON/OFF BUTTON to start the unit.
2. Select cooling operation or healthy dehumidification
operation.
3. Press the ENERGY-SAVING COOLING MODE BUTTON.
4. To cancel the energy-saving cooling mode, press the ENERGY-SAVING
COOLING MODE BUTTON again and unit will operate in previous
mode(Cooling or healty dehumidification mode).
Room Temp. ≥ 24°C 21°C ≤ Room Temp. < 24°C
Cooling Healthy Dehumidification
High
22°C
Operating Instructions
Power
Power Power
button
button button
Heat pump Model
High
23°C
b
P u
Room Temp. < 21°C
Heating
High
24°C
Owner's Manual 13