Boly BG310 Series User Manual page 18

PIR Interval
Work Day
Work Hour
Camera
Position
Recycle Storage
Send To
Send Mode
sensitivity of the PIR is affected by temperature. Higher
temperatures lead to lower sensitivity.
If PIR Trigger/Sensitivity and Time Lapse options are BOTH
OFF, the camera will not capture any photos or videos.
Default: Normal
This setting indicates how long the PIR sensor will be disabled
after each camera triggering. During this time the PIR sensor
will not react to any detected motion. The PIR Interval can be
set between zero seconds to a maximum of 1 hour.
Default: 10 seconds
Choose the days of the week you want the camera to work. This
setting is only available in Hunting Mode.
Default: All
This parameter defines a certain time in a day when the camera
can be triggered, while the device will shut off during
non-working hours. The effective value ranges from 00:00 to
23:59.
When this parameter is set to Off, the camera works at all times.
When the timer switch is ON, the camera works only during the
time according to the preset settings.
Default: Off
Used for multiple cameras in an area. You can set an A-Z
indicator for each of your cameras to distinguish between which
photos are from a specific camera.
Default: Off
In hunting mode, if the TF card is full, the oldest images or
videos will be overwritten by new pictures or videos. This keeps
you from having to retrieve your memory card manually. In
SETUP mode, this option is disabled.
Default: Off
Send the image to your phone or email options.
Phone [MMS]: Send the image to the cellular device via

WAP.
Email [MMS]: Send the image to an email address via WAP.

Email [GPRS]: Send the image to an email address via

SMTP.
Molnus: Send the image/video to Molnus via WAP.

Default: Molnus
There are 3 options for this setting.
18
Boly Trail Camera BG310 Series