Care And Cleaning; Cleaning The Inside; Cleaning The Outside - GE FUF14 Owner's Manual And Installation Instructions

Care and Cleaning

Cleaning the Inside

To help prevent odors, leave an open box of baking
soda in the freezer.
wring excess moisture out of sponge or cloth when
water and baking soda solution--about a tablespoon (15 ml)
of baking soda to a quart (1 liter) of water. This both cleans
and neutralizes odors. Thoroughly rinse and wipe dry.

Cleaning the Outside

Directions for Cleaning Outside Surfaces, Door Handles, and Trim
Soft, clean cloth or sponge
Mild detergent mixed with warm water
Appliances parts store for approved stainless steel
cleaners: GEAppliancesparts.com or call 877.959.8688
Soft Cleanser™ can be used to remove surface rust,
tarnish and small blemishes.
NOTE: DO NOT allow stainless steel cleaner to come in contact with any plastic parts such as trim pieces, handle
hardware and liners. If unintentional contact of cleaners with plastic parts does occur, clean plastic part with a
sponge and mild detergent mixed with warm water.
No Defrosting
It has been pre-set at the factory to defrost itself
automatically.
49-60763 Rev. 4
DO USE
CAUTION
water when they are cold. Glass shelves may break if
exposed to sudden temperature changes or impact such as
bumping or dropping. Tempered glass is designed to shatter
into many small pieces if it breaks.
bleach or ammonia. They may damage the freezer.
After cleaning the door gaskets, apply a thin layer of
petroleum jelly to the door gaskets at the hinge side.
This helps keep the gaskets from sticking and bending
out of shape.
DO NOT USE
Abrasive cloths, scrubbing sponges, scouring or steel
wool pads
Abrasive powders or sprays
Window Sprays or Ammonia
Citrus or plant oil-based cleaners
Acidic or vinegar-based cleaners
Oven cleaners
Cleaners containing acetone (propanone)
Any cleaner with WARNING about plastic contact
door is opened while the freezer is in the automatic
defrosting cycle.